I'm so glad I was able to find a site to download my missing manuals. Very reasonable prices and they kept me informed about the process and I had my manual within less than a day. The only thing I wish was an option is a 100% English version with no spanish or anything. But overall great site.
The manual is complete with excellent quality! One suggestion, show number of pages and weather it is multi-lingual. The AD 600 Manuel is about 76 pages and over half is non English. This results in a larger print job than usually needed. Having this information, one could select the desired pages for printing.
This is an excellent handbook. We had no information on the appliance until we obtained this and are now able to use the appliance to its full potential. Strongly recommended.
Text excerpt from page 20 (click to view)
18
MAINTENAN(;E
Before replacingthecooktop light bulb or fluorescenttube, I DISCONNECT POWER TO RANGE. Be sure the bulb is I cool. Do not touch a hot bulb with a damp cloth as the bulb I [ may break. I The cooktop featuring conventional surface burners lifts up for easy cleaning of the burner box area. The sealed burner cooktop is designed with two contour wells to catch and contain spills. Because of this design it is not necessary to lift up the cooktop to clean underneath. To preventdamage to the gas tubing or top, do not attempt to ft or remove the cooktop.
Toturn on cooktop light: Press and hold rockerswitch until the light turns on. The oven light switch is located on the backguard, To replace cooktop light: Be sure bulb is cool. Grasp the top trim of the backguard with your thumbs under the front edge and pull outward while lifting to release trim from catches at each end.
To raise the "lift-up" cooktop: When cool, grasp the front edge of the cooktop and gently lift up until the two support rods at the front of the cooktop snap into place.
Remove fluorescent tube and replace with an 18 watt fluorescent tube. Snap top trim back into place and reconnect power to range. Reset the clock, To lower the top: Hold the front edge of the cooktop and carefully push back on each support rod to release the notched support. Then gently lower the top into place. The support rods will slide into the cooktop frame.
Toturn on oven light: Push the rocker switch located on the backguard or on the control panel. To replace oven light: Be sure bulb is cool. Use a dry pothotder, to prevent possible harm to hands, and very carefully unscrew bulb cover, if equipped, and bulb. (Note: Non-self-cleaning models do not have a bulb cover.)
Replace with a 40 watt appliance bulb. Replace bulb cover and reconnect power to range. Reset the clock.