perfect! you just sent to me the copy in Italian witout even my specification!!!! so you are really smart cooperative and efficient. To my opinion the best place all over to get a manual of electronics!!!!
Super nice! Good to have a manual in digital format.
Text excerpt from page 24 (click to view)
USING THE SELF-CLEANING CYCLE
SETTING THE CONTROLS
1. Press SELF CLEAN.
The clean indicator light will light up. This will automatically set a 31�2-hour Self-Cleaning cycle. NOTE: There will be a 30-minute cool-down 1�2 hour before the cycle is over.
PRESS
SELF CLEAN
YOU SEE
ON
2. Set the cleaning time (optional).
If you want a Self-Cleaning cycle longer or shorter than 31�2 hours, use the hour and minute pads to set the cleaning time you want. Press the �up� (s) or �down� (t) pad(s) until a time between 21�2-41�2 hours shows on the display.
PRESS
YOU SEE
ON
TIME
(example for 4 hours, 30 minutes)
� Use 21�2 hours for light soil. � Use 3 �2-4 �2 hours for average to heavy soil.
3. Start the oven.
NOTE: The on and heat indicator lights will light up.
1 1
PRESS
START
ENTER 5 SEC
YOU SEE
ON
4. After Self-Cleaning cycle starts:
The door locked indicator light will light up when the oven door locks. NOTE: If you open the door before starting the Self-Cleaning cycle, �door� will show on the display. If you do not close the door within 5 minutes, the cycle will be canceled.
YOU SEE
ON
5. After Self-Cleaning cycle ends and the oven
reaches normal baking/roasting temperatures: The clean, door locked, and on indicator lights will go out. Press OFF/CANCEL to clear the display.
