perfect! you just sent to me the copy in Italian witout even my specification!!!! so you are really smart cooperative and efficient. To my opinion the best place all over to get a manual of electronics!!!!
Great job supplying the manual.
Many of these products weerepretty obscure, so it was great that you had
the manual for it!
Text excerpt from page 13 (click to view)
Lift-Up Cooktop
1. Lift front of cooktop 2.
at corners and swing up the support rod. Carefully lower the cook-top onto the support rod.
3. Wipe surface under cooktop with warm soapy water. Use soapy plastic scrub pad on stubborn
Spots.
CAUTICN: Do not drop the oooktop. Damage can result to the poroelaln and the oooktop tmme.
Surface Burners
TWICAL TOP BURNER RIME
Lift up the cook-top, following the instructions above. Wipe off surface burners with warm soapy water and a soft cloth after each use. Occasionally check surface burner flames for size and shape as shown. If flames do not burn properly, you may need to remove the surface burners for cleaning (see pageM], or call a qualified technician for burner adjustments. To adJust the LO sefflngs on the control knobs: 1. Turn on the surface burners, then set the controls on LO. 2. Wlthout changing the burner rettlngs, remove the control knobs. 3. Firmly grasp the control stem and insert a small bladed screwdriver into the end of the stem. Turn the screwdriver in either direction until the flame height is Yein (.3l8 cm] or lower in size. Flame must be large enough to malntaln a STABLEFLAME on all burner ports. NEVERADJUST THE FLAME SIZE AT THE MEDIUM SElllNG.
