|
Who's Online
There currently are 6043 guests online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
This is a great manual. It was easy to read and very accurate. The size of the manual is small so email is no problem. I highly recommend it. The manual is very hard to find other than this website.
;
Manual was complete and available promptly, since I had lost my original manual. Very good response.
;
Whilst this is a photo copy, and some of the pages are a little askew, it was all readable and intact. A real bonus finding an old manual for a classic piece of kit that no other site had.
Great stuff.
;
excellent quality, contains circuits and scan quality, 110 pages
;
It was easy done, and I got exactly what I was looking for.
The Oven Vent
Hot air and moisture escape from the oven through a vent located to the rear of the cooktop. Do not block vent. Poor baking will result.
Lighting
Standing Pilots
To light Cookto~ . Pilots:
Remove the surface burner grates from the cooktop. Lift the cooktop and rest on support rod. 2. Make sure all controls are OFF.
1.
3. To light, hold a lit match over the pilot light located between the front and back burners. The pilot flame should be % to J/e in (.635-,953 cm) high. 4. If the pilot flame needs adjustment, turn the pilot adjustment screw on the manifold pipe.
To light Oven Burner Pilot:
I
5. Lower the cooktop and replace the surface burner grates before using the surface burners. I
1.
Make sure the oven control
is OFF.
3. Hold a lit match over the oven burner pilot located at the rear of the burner. 4. After the oven burner pilot is burning steady, check burner lighting by turning the Oven Control to a temperature obove140�F (60°C). The burner will take 50-60 seconds to light. 5. Replace the broiler drawer. 9
2. Remove the broiler drawer. Slide drawer out to stops, lift both sides, then slide the rest of the way out.
|
|
|
> |
|