Very satisfied! I was searching for several days, but nope; till I discovered your webside and there it was at a very reasonable price. Keep up the good work!
Paul
Flanders
I purchased the unit from a private party and the original owners manual was not available. Having the ability to download it was extremely helpful and clarified operating the equipment immensely. This is a complicated unit and without the manual I would not have been able to maximize it's potential. Thank you.
Being a user of older radios of many kinds, preferring them over more modern rigs, this manual was invaluable in the programming of my two. I now know for certain what the assorted buttons functions are, and am very grateful to have found this excellent site. Many thanks for your assistance, Tony.
Clear and easy to read. All details as expected. Price acceptable , and quick delivery.
Text excerpt from page 20 (click to view)
Changing the Cooktop Light
The lop light switch is located on the left side of the front control panel.
cooktop and disconnect the electrical plug to the backguard. Lower the cooktop. 2. Grasp each side of the backguard and lift it straight up.
1. Lift up the
1. Turn backguard over. Remove the four screws holding the back cover panel, then remove the cover. 4. Roll bottom of fluorescent tube away from you until both ends can be removed from the receptacles. Replace with a 20-watt cool-white fluorescent tube. 5. Replace the back cover panel and screws. 6. Replace the backguard. Reconnect the electrical plug under the cooktop. 7. Turn power back on at the main power supply.
Changing the Oven Light
The oven light will only come on when you push the Oven Light switch on the control panel. Push it again to turn off the light.
cIRcurl BREAKER
es
la!!
2. Remove the light bulb from its socket. Replace the bulb with a 40-watt appliance bulb. Turn the power back on at the main power supply.
