My first manual from Owner-Manuals.com but not the last! I am very satisfied with the easy ordering and promt delivery of a manual I did not find anywhere else.
This manual is very helpfull to use the Power Supply. All technical information has been available.
For service use the circuit diagrams are very good.
Thanks .
Very comprehensive document which is a must-have for any Satellit 2100 owner whose set up is somewhat intricate. Due to the bad quality of the pictures that are rather dark and a bit blurred I gave 4-star feedback.
The manual was missing 2 pages but when I presented the problem to the company they made every attempt to get the 2 pages to me, when they couldn't they refunded my money. A very pleasing and easy transaction. The manual they provided was the original, it was concise and to the point. I plan to do business with this company again when should the need arise.
The owners manual is very good. all my how to questions were answered in detail.
Text excerpt from page 11 (click to view)
Lighting Standing Pilots
To light Cooktop I Pilots: I
1. Make
sure all controls are OFF.
2. Remove the grates and reflector pans from cooktop. Lift the cooktop and rest on support rod.
3. To Ilght, hold a lit match over the pilot light located between the front and back burners. The pilot flame should be Ydto J/ain (.6X-.953 cm) high. 4. If the pilot flame needs adjustment, turn the pilot adjustment screw on the manifold pipe. 5. Lower the cooktop and replace the grates before using the surface burners.
To light Oven Burner Pilot:
sure the oven control is OFF. 2. Remove the broiler drawer. Slide drawer out to stops, lift both sides, then slide the rest of the way out.
1. Make
3. Hold a lit match over the oven burner pilot located at the rear of the burner. 4. After the oven burner pilot is burning steady. check burner lighting by turning the Oven Control to a temperature abovel4O�F (60°C). The burner will take 50-60 seconds to light. 5. Replace the broiler drawer.
