perfect! you just sent to me the copy in Italian witout even my specification!!!! so you are really smart cooperative and efficient. To my opinion the best place all over to get a manual of electronics!!!!
Super nice! Good to have a manual in digital format.
Text excerpt from page 7 (click to view)
In case of a prolonged power failure: Surface burners can be manually lighted. Hold a lighted match near a burner and turn the control to the LITE position. After the burner lights, turn the control to the desired setting.
l
l
l
Burn, Fire and Explosion Hazard Burner flame should not extend beyond the edge of the cooking utensil. The flame can burn you and cause poor cooking resufts. Be sure all control knobs are turned to OFF when you are not cooking. Someone could be burned or a fire could start if a burner is accidentaiiy left ON. lf the flame should go out while cooking, or if there is a strong gas odor, turn the burners OFF. Waft five minutes for the gas odor to disappear before relighting burner. lf gas odor is still present, see safety note on page 3. Failure to follow these precautions could result in explosion or fire.
Setting the clock
When the range is connected to power, the clock display will blink at �88:88� until the time of day is set. 1. Push and hold the Set button while turning the Set Knob in either direction to the correct time of day. 2. Release the Set button after the time of day is set.
