|
Who's Online
There currently are 6031 guests and 1 member online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
Excellent service from this company (including a total refund on an earlier purchase when through no fault of the company the manual was incomplete). I have purchased several manuals which I have been very satisfied with, as I am with this one. Highly recommended.
;
It was easy to order and received exactly what I needed. Only complaint would be the 24 hours you have to wait.
;
Manual was delivered in a timely manner and was all in English as advertised. The manuals I received when we moved into our flat were in German, Italian, and French. Having never used a steamer before, and not speaking/reading German very well, I needed an English Manual. this was a huge help.
;
Great Manual. This manual is available no where else. It was exactly what I was looking for. Only in German.
;
This GRUNDIG UV5A Owner Manual is not only an instruction manual but a total functional circuit description of the Multimeter and includes circuit diagram at the end pages. It is very helpful for repairing and calibrating the instrument. It is written in two languages English and German for international support. It was very easy to repair my unit with this document. Regards, Regis Pauly, Electrical Engineer.
USING YOUR RANGE
TONES
Tones tell you if a function is entered correctly or not. They also tell you when a cycle is completed. To shut off all tones except the end-of-timer and error tones: Press and hold STOP TIME for 5 seconds. A short tone will sound to tell you the tones have been changed. Repeat to turn the tones back on. You will see �oFF� for 3 seconds when the tones are turned off and �on� for 3 seconds when they are turned on. To choose between high and low volume tones: Press and hold DELAY START TIME for 5 seconds. A short tone will sound to tell you the tones DELAY have been changed. Either �HI� or �LO� will START appear on the time display for 3 seconds to TIME show the volume you chose.
STOP TIME
BAKING/ROASTING
IMPORTANT:
1. Place the racks where you need them in
the oven. For more information, see
Front
� Never try to light the oven burner during a
power failure. bottom.
� Never place food on the oven door or oven
Your oven is designed with the ACCUBAKE® temperature management system to constantly monitor oven temperature. The burner element will cycle, as needed, to maintain the desired temperature. This feature is automatically activated when the oven is in operation.
�Positioning racks� under �Using the Oven�, earlier in this section.
Rear
2. Choose the bake setting.
PRESS
BAKE
YOU SEE
F
BAKE
3. Set the temperature (optional).
Do this step if you want to set a temperature other than 350°F. Press v to raise the temperature or w to lower the temperature in 5°F amounts. Use these pads until the desired temperature shows on the small display.
PRESS
TEMP
YOU SEE
F
BAKE
(example for bake at 375°F)
4. When roasting, put your food in the oven. You
do not have to preheat the oven when roasting, unless your recipe recommends it. NOTE: The oven will cook normally even though the preheat conditioning timer is displayed. 14
Roasting meats and poultry
� For even cooking, place the meat on a rack in a
shallow pan. This keeps the meat out of the drippings and allows the heat to circulate better. � Use a meat thermometer for the most accurate doneness. Insert it so the tip is in the center of the largest muscle or thickest portion of the meat or poultry. Make sure the thermometer is not touching bone, fat, or the bottom of the pan.
|
|
|
> |
|