WHIRLPOOL RUD3000DQ1
Owner's Manual

Canceling

a cycle

You can cancel a cycle at any time. 1. Turn the Cycle Control Knob slowly clockwise until you hear water draining. Let the dishwasher drain completely. 2. Open the door. 3. Turn the Cycle Control Knob to OFF.

Selecting

cycle

options

You can select an option washer starts as long as passed the point that the example, you can select DRY any time before the Knob reaches DRY.

after the dishthe cycle has not option is used. For ENERGY SAVER Cycle Control

HEATED

DRY option

If the HEATED DRY option is selected, air in the dishwasher is heated during the �dry� part of the cycle. For best results, use a liquid rinse agent and select HEATED DRY. NOTE: For models with 7 buttons: Select RESET OPTIONS if the ENERGY SAVER DRY option was selected for the previous cycle.

Models with Rocker Switch

Models with 3or5

Models with 7

buttons

buttons

ENERGY

SAVER

DRY option
OR

If the ENERGY SAVER DRY option is selected, air in the dishwasher is not heated during the dry part of the cycle. Using this option helps save energy, but dishes take longer to dry (overnight) and some water spotting may result. Some items (such as plastics) may need towel drying. For best results, use a liquid rinse agent.

Models with Rocker Switch

Models with buttons

LOW ENERGY option
(on some models)

WASHING

When the LOW ENERGY WASHING option is selected, water heating is reduced during the main wash and final rinse. This will reduce the amount of electricity needed to run the dishwasher. However, dishes may not wash as well.

.i N
13