The manual was made available promptly. I is a clean scan of the original. I had no problem downloading it. The scan was well centered and cleanly formatted. It is as good a product as can be had without being the original document.
Received downlink in less then 8 hours, Item was in good copy condition, and told me how to program the clock timer. The price was very resonable, and the process was very automated and was GREAT to work with.
I was very pleased with the manual I got for my amateur (ham) radio. Without it I could not figure out how to input and/or change the P/L setting on my radio. It drove me nuts as the radio was essentially useless. That all changed when my manual came. Then it took only minutes and I was done. Now my radio works fine. This is an exceptionally good resource as it's a very easy and user friendly download. Thank you very much! Dziękujemy za!
It answered my question, which was how to load the paper. I did notice that the very end of the manual was not visible.
Text excerpt from page 12 (click to view)
Removing
Style 3
the meat drawer
and cover
Remove the meat drawer and cover for easier cleaning.
To remove the meat drawer: 1. Slide meat drawer out to the stop.
2. Lift the front of the meat drawer. 3. Slide meat drawer out the rest of the way. 4. Replace in reverse order.
To remove the cover: 1. Remove meat drawer.
2. Push cover back to release the rear of the cover from the shelf. 3. Tilt cover up at the front. 4. Pull cover forward and out.
To replace the cover: 1. Pit notches and rear edge of cover over
rear and center crossbars on the shelf. 2. Lower cover into place. 3. Replace the meat drawer.
Remove meat drawer before cover.
Styles
1 and 2
To remove the meat drawer: 1. Slide meat drawer out to the stop.
2. Lii front of meat drawer. 3. Slide meat drawer out the rest of the way. 4. Replace in reverse order.
To adjust the cover position: 1. Tilt front of cover up. 2. Lii back of cover.
3. Pull cover straight out.
To replace the cover: 1. Guide the cover�s rear hooks into
the slots in the shelf supports on the cabinet wall. 2. Tilt cover up at the front until the hooks drop into the slots. 3. Lower front of cover to a level position and replace meat drawer.
Pull out to the stop,
lift the front and pull again.