The Owner's manual was very helpful. The WEGA is about 35 years old and needed repair.
Your Website is pretty good und easily to handle.
Thank You
Carl-W. Lohmann
My first manual from Owner-Manuals.com but not the last! I am very satisfied with the easy ordering and promt delivery of a manual I did not find anywhere else.
This manual is very helpfull to use the Power Supply. All technical information has been available.
For service use the circuit diagrams are very good.
Thanks .
Very comprehensive document which is a must-have for any Satellit 2100 owner whose set up is somewhat intricate. Due to the bad quality of the pictures that are rather dark and a bit blurred I gave 4-star feedback.
Text excerpt from page 51 (click to view)
CARING FOR YOUR RANGE
The oven lights
The oven lights will come on when you open the oven door. To turn the lights on when the oven door is closed, press the Oven Light pad on the control panel.
LIGHT
NOTE: Make sure oven is cool before replacing a light bulb.
To replace an oven light:
1. Disconnect power and make sure the oven is cool before replacing the light bulb.
4. Replace the light bulb cover by turning it clockwise. The light bulb cover must be in place when using the oven. The cover protects the bulb from breaking and from high oven temperatures. 5. Reconnect power. NOTE: The oven lights will not work during the Self-Cleaning cycle.
2. Remove the glass bulb cover in the back of the oven by turning it counterclockwise. 3. Remove the light bulb from its socket. Replace the bulb with a similar 125-volt, 15-watt appliance bulb.