This is one of four manuals I have downloaded recently.
Purchase was very straight forward and the authorising email arrived in about 4 hours.
The quality of the scan is good. Print is clear and square to the page edges.
Exactly as advertized. High quality digital copy of the Nak 610 user manual. Easy download and access. Highly recommended.
Text excerpt from page 19 (click to view)
5. Push the Bake button. The small display
will show �---o�.
6. Turn the Set Knob until the desired
baking temperature appears in the display. Changes can be made at any time by pressing a command button.
NOTE: If you have not set a temperature within 5 seconds, a tone will sound and
BAKE will flash to remind you to set a temperature. 7. When the start time is reached, DELAY and STOP will go off and ON will light up. The display will show the actual oven temperature (increasing in 5� increments) until the set temperature is reached. 8. When the baking/roasting time is completed, 3 tones will sound. The large display will show �OHFI:~~�. A tone will sound every 10 seconds for 5 minutes (to remind you that food is left in the oven) or until the Cancel button is pushed.
To start baking/roasting and stop automatically:
now
1. Position the oven rack(s) properly and place the food in the oven. 2. Push the Bake Time button. BAKE TIME
will light up and �--:--� will show in the display.
3. Turn the Set Knob until the desired
baking/roasting time shows in the large display. The bake time can be set for any amount of time from 10 minutes to 11 hours, 50 minutes. The display will increase in 5-minute increments.
