The Owner's manual was very helpful. The WEGA is about 35 years old and needed repair.
Your Website is pretty good und easily to handle.
Thank You
Carl-W. Lohmann
My first manual from Owner-Manuals.com but not the last! I am very satisfied with the easy ordering and promt delivery of a manual I did not find anywhere else.
This manual is very helpfull to use the Power Supply. All technical information has been available.
For service use the circuit diagrams are very good.
Thanks .
Very comprehensive document which is a must-have for any Satellit 2100 owner whose set up is somewhat intricate. Due to the bad quality of the pictures that are rather dark and a bit blurred I gave 4-star feedback.
Text excerpt from page 12 (click to view)
Removing
the meat drawer
and cover
Pull out to the stop, lift the front and pull again.
To remove the meat drawer: 1. Slide the meat drawer straight out to the stop. 2. Lift the front slightly. 3. Slide out the rest of the way. 4. Replace in reverse order. To remove the cover: 1. Remove the crisper, the crisper cover and the meat drawer. 2. Tilt front of cover up. 3. Lift cover at back and pull straight out. 4. Replace in reverse order.
Adjusting
the meat drawer
temperature
Cold air flows against the meat drawer through an opening between the freezer and the refrigerator. This helps keep the meat drawer colder than the rest of the refrigerator for better storage of meats. Slide the control to let more or less cold air through.
Removing
the freezer
bin/basket
I
Pull out to the stop, lift the front and
To remove the bin/basket: 1. Slide out to the stop. 2. Lift the front to clear the stop. 3. Slide out the rest of the way. To replace the bin/basket: 1. Place on the slides. 2. Make sure the wire stops clear the front of the slides. 3. Slide in all the way.
