|
Who's Online
There currently are 6043 guests online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
The manual was made available promptly. I is a clean scan of the original. I had no problem downloading it. The scan was well centered and cleanly formatted. It is as good a product as can be had without being the original document.
;
Received downlink in less then 8 hours, Item was in good copy condition, and told me how to program the clock timer. The price was very resonable, and the process was very automated and was GREAT to work with.
;
Fast service, document is OK. Thanks! Searched for it long time.
;
I was very pleased with the manual I got for my amateur (ham) radio. Without it I could not figure out how to input and/or change the P/L setting on my radio. It drove me nuts as the radio was essentially useless. That all changed when my manual came. Then it took only minutes and I was done. Now my radio works fine. This is an exceptionally good resource as it's a very easy and user friendly download. Thank you very much! Dziękujemy za!
;
It answered my question, which was how to load the paper. I did notice that the very end of the manual was not visible.
Variable
Broil Feature:
Loosen Screw
the Locking
You migh: want to broil some foods slower than others. Broiling can be slowed down by settmg a lower temperature on the Oven Temperature Control Knob Instead of �BROIL.� Using a lower temperature will cause the broil element to turn on and off during the broiling so that the food broils more slog ly. When the Oven Temperature Control Knob is on �BROIL.� the Broil Element heats all the time. Set the temperature lower and it heats some of the time The lower the temperature setting. the shorter are the periods of heating NOTE: The Oven Selector must be in the �BROIL� position in order for the Broil Element to heat
Resetting the oven temperature control:
Lower: move black part toward �LO.� One notch equals about 10°F (S�C).
Does your new oven seem hotter or colder than your old oven? The temperatures in older ovens often shift very gradually, getting hotter or colder without the user really noticing the change. Your new oven is properly adjusted to provide accurate temperatures. but when compared to your old range. the new design may give you different baking results If you think that the temperature setting on your range needs to be hotter or colder. you can adjust the Oven Temperature Control Knob by yourself. To adjust the setting, first pull the Oven Temperature Control Knob straight off. On the back. just across from the locking screw, are a row of notches on the black part of the knob and one tooth on the chrome part. To set your oven about lO�F(5�C) cooler. loosen the locking screw about two full turns and move the row of notches one notch closer to �LO.� To set your oven about 10-F(5�C) warmer. move the row of notches one notch closer to �HI.� Each notch equals about 10-F(5�C). Tighten the locking screw and put the knob back on the control panel
Setting the clock to the correct time of day
Higher: move black part toward �HI.� One notch equals about 10°F (ST).
1. Push in the Minute Timer Knob and turn it clockwise until the digits show the correct time of day. 2 The Minute Timer dial will turn as you set the clock. When clock is set. let the knob pop out. Then. while it is out. turn the Minute Timer hand counter-clockwise to �OFF.� If you push in on the knob when setting the Minute Timer. you will change the setting of the clock.
Using window. the Minute Timer you want to time show in the
Turn the knob until the minutes
Minute
Timer
When the time you set is up. a buzzer will sound. Turn the dial to �OFF� to stop the burzer. The Minute Timer does not start or stop cooking. It only buzzes when the time you set is up. It can be used to time almost any cooking operation. It can even remind you of other things (like when to add softener to the washer). For the most accurate timing, turn the knob past the time you want Thcln turn it back to the setting
5
|
|
|
> |
|