perfect! you just sent to me the copy in Italian witout even my specification!!!! so you are really smart cooperative and efficient. To my opinion the best place all over to get a manual of electronics!!!!
Great job supplying the manual.
Many of these products weerepretty obscure, so it was great that you had
the manual for it!
Text excerpt from page 1 (click to view)
Quick Start Reference Guide
Refer to Product Safety Manual for Safety Statements
Complete Owner�s Manual available online
Manual Operation
1. 2. 3. 4.
To cook food using a specific time and power level. Open oven door and place food in oven. Close door. Press TIME ENTRY pad. Enter cooking time by using the numbered pads. Press a power level option to change power level. � Current power level displays if less than 100%.
No popcorn
5. Press START pad. � POWER displays when microwave energy is present. 6. At end of cooking cycle oven beeps. Oven light and fan will operate for approximately one minute after completion.
Preprogrammed Pads
No metal utensils
To cook food using pads preprogrammed with cooking sequences. 1. Open oven door and place food in oven. Close door. 2. Press desired pad. 3. Oven begins to cook. � POWER displays when microwave energy is present. 4. At end of cooking cycle oven beeps and shuts off. Oven light and fan will operate for approximately one minute after completion.
Programming
To program the amount of time, power level setting for a pad: 1. Open oven door. � Display shows READY. Fan and light operate. � If door is closed or RESET pad is pressed before finishing programming sequence, oven exits programming mode. 2. Press and hold pad 1 for approximately 5 seconds. � After 5 seconds, signal sounds. � Display shows p:O 3. Press pad to be programmed. � Display shows cooking time. 4. Enter desired cooking time. 5. If desired, press pad to change power level. � Display shows power level if other than 100 percent power. 6. If stage cooking is desired, press TIME ENTRY pad. � Display briefly shows P:0 followed by the pad number and the stage being programmed. � Cook time and power level for that stage display. � Repeat steps 5�7 to create additional stages. � Pressing TIME ENTRY pad repeatedly will scroll through all stages for that programmed pad. 7. Press START pad to save new cooking time and power level in oven memory. � Display shows P:0 � Repeat step 3�6 to program additional pads. 8. Press STOP/RESET pad or close oven door to exit programming mode.