Thanks to Owner-Manuals.com! This manual was exactly what I needed. As Amana was purchased by Maytag and later by Whirlpool, there was no way to receive it from their websites. I was lucky to find this resource.
Great to be able to set channels again, on an old but stoll fine working TV
Text excerpt from page 10 (click to view)
Adjusting the Oven Temperature
Control
Does your oven seem hotter or colder than your old oven? The temperature of your old oven may have shifted gradually without your noticing the change. Your new oven is properly adjusted to provide accurate temperatures. But when compared to your old oven, the new design may give you different results. If after using the oven for a period of time, you are not satisfied with the temperature settings, they can be adjusted by following these steps:
1. Pull the
Oven Temberature Knob straight off. �
Control
2. Loosen the lockina screws inside the control knob. iote the position of the notches.
TOOTH
NOTCHES
I
TOOTH
NOTCHES
3. To lower the femperafure,
move the tooth a notch closer to LO. Each notch equals about 10°F 15°C).
4. To raise the temperature, move the tooth a notch closer to HI. Each notch equals about 10°F (5°C). Tighten replace the locking the control screws knob. and