I did not have the manual for a Whirl Pool gas dryer, therefore I purchased it from Owner-manuals. This is exactly what I needed. Thank you for the service.
I was so pleased to get the owner`s manuel within one hour! Thanks again.
Regards
Werner
Text excerpt from page 33 (click to view)
3. Set the cycle. To start cleaning immediately: Set both the Oven Selector and Oven Temperature Control Knob to CLEAN. A 3-hour Self-Cleaning cycle will be set automatically. �C3:CKt�with the colon flashing will show in the display and the Clean Time Indicator Light will come on.
If a cleaning cyck other than 3 hours is desired, use the Hour and Minute pads to set the desired cleaning time. Push the �up� (A) or �down� (V) pad(s) until a time between 2-4 hours shows in the display. l Use 2 hours for light soil. l Use 3-4 hours for moderate to heavy soil. Push the Start/Enter pad. The Clean Time Indicator Light will stay on to show that the oven is programmed for the SelfCleaning cycle. Skip to Step 4 if you want the SelfCleaning cycle to start now. To delay the start using Stop Time: Set both the Oven Selector and Oven Temperature Control Knob to CLEAN. Push the Stop Time pad. The Clean Time Indicator Light will flash and the Stop Time Indicator Light will light up. Use the Hour and Minute pads to set the desired stop time. Push the �up� (A) or �down� (V) pad(s) until the correct time shows in the display. The oven will automatically compute the delay start time by subtracting the set cleaning time from the set stop time.
