This is an excellent handbook. We had no information on the appliance until we obtained this and are now able to use the appliance to its full potential. Strongly recommended.
The Owner's manual was very helpful. The WEGA is about 35 years old and needed repair.
Your Website is pretty good und easily to handle.
Thank You
Carl-W. Lohmann
My first manual from Owner-Manuals.com but not the last! I am very satisfied with the easy ordering and promt delivery of a manual I did not find anywhere else.
Text excerpt from page 10 (click to view)
Adjusting the Oven Temperature
Control
Does your oven seem hotter or colder than your old oven? The temperature of your old oven may have shifted gradually without your noticing the change. Your new oven is properly adjusted to provide accurate temperatures. But when compared to your old oven, the new design may give you different results. If after using the oven for a period of time, you are not satisfied with the temperature settings, they can be adjusted by following these steps:
LOCKING
1. Pull
the Oven Temperature Knob straight off.
Control
2. Loosen the locking screws inside the control knob. Note the position of the notches.
NOTCHES
TOOTH
NOTCHES
3. To lower the temperature, move the tooth a notch closer to LO. Each notch equals about 10°F (5°C).
4. To raise the temperature, move the tooth a notch closer to HI. Each notch equals about 10°F (5°C). Tighten replace the locking the control screws knob. and
