Thank you for having the manual I needed for an older model Aiwa stero I had found on Ebay --- I wanted the Aiwa because I had tapes and cd's but I did not have a manual as to how to operate the system... I found what I needed and it has enabled me to set the system up for my enjoyment.
helpful manual.good service.Quick response.will use again
Text excerpt from page 9 (click to view)
Adjusting the Oven Temperature
Control
Does your oven seem hotter or colder than your old oven? The temperature of your old oven may have shifted gradually without your noticing the change. Your new oven is properly adjusted to provide accurate temperatures. But wher compared to your orb oven, the new design may give you different results. If after using the oven for a period of time, you are not satisfied with the temperature settings, they can be adjusted by following these steps:
LOCKING
1. Pull the
Oven Temperature Control Knob straight off.
I. Loosen the locking screws inside the control knob. Note the posltlon of the notches.
TOOTW
NOTCHES
NOTCHES
TOOTH
3. To lower the temperature, move the tooth a notch closer to LO. Each notch equals about 10°F (5°C).
4. To raise the temperature, move the tooth a notch closer to HI. Eacl notch equals about 10°F(SC]. Tighten the locklng screws and replace the control knob.
