This manual is very helpfull to use the Power Supply. All technical information has been available.
For service use the circuit diagrams are very good.
Thanks .
Very comprehensive document which is a must-have for any Satellit 2100 owner whose set up is somewhat intricate. Due to the bad quality of the pictures that are rather dark and a bit blurred I gave 4-star feedback.
The manual was missing 2 pages but when I presented the problem to the company they made every attempt to get the 2 pages to me, when they couldn't they refunded my money. A very pleasing and easy transaction. The manual they provided was the original, it was concise and to the point. I plan to do business with this company again when should the need arise.
Irrespectively of this manual exist only germany language, it's useful - although i need some additional task to translate: My english is bad, but usable - but i really dont speak germany. :)
Text excerpt from page 9 (click to view)
Adjusting the Oven Temperature
Control
Does your oven seem hotter or colder than your old oven? The temperature of your old oven may have shifted gradually without your noticing the change. Your new oven is properly adjusted to provide accurate temperatures. But wher compared to your orb oven, the new design may give you different results. If after using the oven for a period of time, you are not satisfied with the temperature settings, they can be adjusted by following these steps:
LOCKING
1. Pull the
Oven Temperature Control Knob straight off.
I. Loosen the locking screws inside the control knob. Note the posltlon of the notches.
TOOTW
NOTCHES
NOTCHES
TOOTH
3. To lower the temperature, move the tooth a notch closer to LO. Each notch equals about 10°F (5°C).
4. To raise the temperature, move the tooth a notch closer to HI. Eacl notch equals about 10°F(SC]. Tighten the locklng screws and replace the control knob.