Thanks to Owner-Manuals.com! This manual was exactly what I needed. As Amana was purchased by Maytag and later by Whirlpool, there was no way to receive it from their websites. I was lucky to find this resource.
A comprehensive Operating and Service Manual. All schematics are complete and easy to read. The PCB drawings and complete parts list are very helpful. I would definitely recommend this manual.
Text excerpt from page 12 (click to view)
The Display wlll.show what you touched in even minutes. Thls example shows 4 mlnutes. 3. Touch a Number Pad for the new oooklng time you want from 1 to 9 mlnutes.
4. Select a Cook Power. (Optlon: Sklp to Step 6 If you want to cook at HIGH power.)
To select a Cook Power other than HIGH, touch COOK POWER. The WCX POWERlndlcator Llght will come on and the Dlsplay will show �P-HI:� Thls shows the oven Is preprogrammed to cook at full (HIGH] power.
The Dlsplay will show what you touched. This example shows you touched Number Pad 5 for 50% of full power. 5. Touch a Number Pad for the Cook Power you want.
6. Touch START.
The AUTO SETIndicator Light will stay on while the oven Is cooklng In the preprogrammed cycle. If you selected a Cook Power other than HIGH, the COOK POWERlndlcator Light will also come on. Thls shows you the oven is cooklng at a se lected Cook Power. The Display counts down the time to show how much cooklng time is left. For 2 of every 10 seconds, the Display will show the Cook Power you selected, If you are uslng a Cook Power other than hlgh.
When Auto Set ends, �End� will show on the Display and 4 beeps will sound. (You can stop the beeplng by openlng the door or by touching CANCEL) �End� will remaln on the Display and a remlnder tone will sound every 60 seconds (to remlnd you that food Is left In the oven) until the door Is opened or CANCEL Is touched. The Dlsplay will then show the tlme of day.
