|
Who's Online
There currently are 5706 guests online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
A comprehensive Operating and Service Manual. All schematics are complete and easy to read. The PCB drawings and complete parts list are very helpful. I would definitely recommend this manual.
;
SCANNING OF HIGH QUALITY
VERY, VERY HIGH VELOCITY DOWNLOAD
VERY GOOD PRICE,
TRUE SATISFIED, THANKS
;
Genuine Toshiba owner's manual. Couldn't really ask for more. And written in understandable English in contrast to a few recent experiences I have had with manuals for other equipment other than Toshiba but made in China and written in "Chinglish"!
;
I purchased a vintage Sony mixer off eBay and within the hour was able to locate and purchase the manual for it.I mean really,where else can you find a manual for a product made in 1983!? It was easy to find and purchase/download the manual I needed.I will use this site again for other equipment I have! Great site!
;
manual de usuario perfecto y completo de buena calidad de impresion y muy detallado ideal !
Lint screen
The lint screen is inside the dryer drum, on the back wall. Clean it before each load. A screen blocked by lint can increase drying time. 3. Roll lint off the screen with your fingers. 1 DO NOT rinse or wash the screen. Wet 11 lint is hard to A--remove. Squeeze
Pull straight
out.
body;
pull cover off.
4. Replace the cover on the body of the lint screen. 5. Push the lint screen straight back until it clicks into place.
1. Use the finger holes to pull the lint
screen straight out. 2. Lightly squeeze the body, shown, while pulling the cover as off.
Lint removal
Lint can gather inside the dryer and create a FIRE HAZARD. This lint should be removed at least every 2 to 3 years, or more often, depending on dryer usage. Access Door /Funnel
lgnlter ELECTRIC DRYERS GAS DRYERS
Cleaning should be done only by a qualified
WARNING: Avold electrical shock l hazard - unplug power supply cord or turn off electrlcal power. Avold InJury or damage - do not put hands Inslde cabinet. Make sure dryer Is cool.
person.
l
l
1. Remove back panel (electric) or lower access panel [gas]. 2. Avoid damaging wires, thermostats, funnel or igniter. 3. Remove lint from shaded area see art - with a soff brush or vacuum cleaner. 4. Replace panel; reconnect and re-level dryer.
9
|
|
|
> |
|