This manual is very helpfull to use the Power Supply. All technical information has been available.
For service use the circuit diagrams are very good.
Thanks .
Very comprehensive document which is a must-have for any Satellit 2100 owner whose set up is somewhat intricate. Due to the bad quality of the pictures that are rather dark and a bit blurred I gave 4-star feedback.
The manual was missing 2 pages but when I presented the problem to the company they made every attempt to get the 2 pages to me, when they couldn't they refunded my money. A very pleasing and easy transaction. The manual they provided was the original, it was concise and to the point. I plan to do business with this company again when should the need arise.
Irrespectively of this manual exist only germany language, it's useful - although i need some additional task to translate: My english is bad, but usable - but i really dont speak germany. :)
Text excerpt from page 9 (click to view)
USING YOUR DRYER
4. (OPTIONAL STEP) Some dryers have an On/Off
FINISH GUARD selector or an Off/30 min. or 90 min. FINISH GUARD® Plus selector. These features protect your clothes from wrinkling when you do not remove them from the dryer as soon as it stops.
®
5. (OPTIONAL STEP) If your dryer has a Cycle
Signal (End of Cycle Signal) selector, set the selector to On if you want the dryer to sound a signal when a cycle is finished. � The signal is helpful when you are drying permanent press, synthetics, and other items that should be removed from the dryer as soon as it stops. � On some models, the End of Cycle Signal is part of the Start (Push to Start) button. � On some models, the signal volume can be adjusted from Softer to Louder.
� Set the FINISH GUARD selector to On to
tumble the load without heat every few minutes up to 45 minutes after the drying cycle ends. choose up to 30 or 90 minutes of periodic unheated tumble time after the drying cycle ends.
� The FINISH GUARD Plus selector lets you
� A signal will sound every few minutes while
FINISH GUARD (FINISH GUARD Plus) is running if the Cycle Signal (End of Cycle Signal) feature is set to On. The signal and cycle end when you open the dryer door.
6. Push the Start (Push to Start) button.
� Set the FINISH GUARD (FINISH GUARD Plus)
selector to Off if you do not want to run this feature. NOTE: Some dryers have a FINISH GUARD feature that cannot be turned On or Off. See page 13. NOTE: Your dryer stops automatically when a cycle ends.
