This is an excellent handbook. We had no information on the appliance until we obtained this and are now able to use the appliance to its full potential. Strongly recommended.
The Owner's manual was very helpful. The WEGA is about 35 years old and needed repair.
Your Website is pretty good und easily to handle.
Thank You
Carl-W. Lohmann
My first manual from Owner-Manuals.com but not the last! I am very satisfied with the easy ordering and promt delivery of a manual I did not find anywhere else.
Text excerpt from page 8 (click to view)
Operating Continued
Instructions
UsingTUMBLE PRESS�
The TUMBLE PRESS setting removes wrinkles from clothing that has been packed in a suitcase or closet, and from items not removed from the dryer at the end of a cycle. 1. Set the Cycle Control Knob on TUMBLE PRESS. 2. Press the PERM�T PRESS Temperature Selector. 3. Push the Start Button. The load will tumble in heated air for 15 minutes. Then the dryer will tumble the clothes for 5 more minutes without heat. For best results, put only a few items at a time in this cycle. As soon as the dryer stops, put the items on hangers or fold them. The dryer sounds a signal to let you know when the cycle is finished. The signal cannot be turned off and is not adjustable. The signal is helpful when you are drying permanent press, synthetic and other items that should be taken out as soon as the dryer stops.
End-of-cycle signal
�5 P3� \?
Lint signal
Clean the lint screen before each load. If you neglect to clean your lint screen, a signal will sound. The (whistle tone) signal lets you know the air flow is being restricted. Restricted air flow reduces drying efficiency. Turn off the dryer and clean the lint screen as shown on page 11.
