|
Who's Online
There currently are 6043 guests online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
Great price, Quick delivery, the document was very usefull A+++++++++++++++
;
Thank´s for your help, I already recived these manual from you
;
Thank you for your manual It has the basic things to and i use the Oszi for Longer Time.
THX
;
Actually, I was looking for this information for 3 years!...now thanks to you, the manual is on my hands and of great help, cause I understand now where I was doing wrong connections and wires...excellent, I'll be back to you if in need, thank you.
;
This manual covers the main equipment features only. While it also includes the procedure for saving and loading from the now long obsolete memory cards it does not mention the how to operate with the optional floppy drive interface so I am still at a loss about how to use this! Note that there is a separate manual covering the MIDI interface and programming via the keyboard, not included in this download. You will also need to get hold of this if you want to use the MIDI interface properly. Basically there is little difference between this manual and the free to download manual for the similar PR60 model.
Lint screen
Clean increase the lint screen before each load. A screen drying time and may be a FIRE HAZARD. blocked by lint can
Open the lid and pull the lint screen straiaht out.
ROLL the lint off the screen with your fingers. DO NOT rinse or wash the screen. Push the screen place. firmly back into
Lint removal
Lint can gather inside the dryer and create a fire hazard.This lint should be removed every 2 to 3 years, or more otten, depending on dryer usage.
ELECTRIC DRYERS Cleaning
l
GAS DRYERS person.
should
be done only by a qualified
Avoid electrical shock hazard-unplug power supply cord or turn off 0 electrical power. l Avoid injury or damage - do not put hands inside cabinet. l Make sure dryer is cool.
1. Remove back panel (electric) or lower access panel (gas]. 2. Avoid damaging wires, thermostats, funnel or igniter. 3. Remove lint from shaded area see art- with a soft brush or vacuum cleaner. 4. Replace panel; reconnect and re-level dryer.
9
|
|
|
> |
|