|
Who's Online
There currently are 5741 guests online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
Very satisfied with received document, all is right, Thank You very much, it was a Pleasure to work with You.
;
great site, the most easy and fastest way to find the manual you need, no 5 star because the manual was only available in german, but I speak german as well so no problem for me.
;
thanks for this download i got a pioneer bdp-lx70a blu-ray player and it had no manual i search everywhere on the internet and came across owner-manuals.com and i found that it was so easy to find and downloaded from this site if i ever need a manual again this would be the first place that i would come too thanks guys
;
Superb! It's the original manual. We can now use our old calculator with its full function.
;
This is a very well written and comprehensive manual. It answered all our queries.
Lint screen
The lint screen is inside the dryer drum, on the back wall. Clean it before each load. A screen blocked by lint can increase drying time. 3. Roll lint off the screen with your fingers. 1 DO NOT rinse or wash the screen. Wet 11 lint is hard to A--remove. Squeeze
Pull straight
out.
body;
pull cover off.
4. Replace the cover on the body of the lint screen. 5. Push the lint screen straight back until it clicks into place.
1. Use the finger holes to pull the lint
screen straight out. 2. Lightly squeeze the body, shown, while pulling the cover as off.
Lint removal
Lint can gather inside the dryer and create a FIRE HAZARD. This lint should be removed at least every 2 to 3 years, or more often, depending on dryer usage. Access Door /Funnel
lgnlter ELECTRIC DRYERS GAS DRYERS
Cleaning should be done only by a qualified
WARNING: Avold electrical shock l hazard - unplug power supply cord or turn off electrlcal power. Avold InJury or damage - do not put hands Inslde cabinet. Make sure dryer Is cool.
person.
l
l
1. Remove back panel (electric) or lower access panel [gas]. 2. Avoid damaging wires, thermostats, funnel or igniter. 3. Remove lint from shaded area see art - with a soff brush or vacuum cleaner. 4. Replace panel; reconnect and re-level dryer.
9
|
|
|
> |
|