5 star quality on these downloadable manuals. Easy to read and all the information is there. A must when doing a custom install or needing to service your precious old school electronics.
very helpful, the information in these manuels are very detailed
Text excerpt from page 4 (click to view)
Starting your washer
your washer. 1 Measure and add detergent 2 Place sorted load In washer 3 Start washer
Select 1. LOAD
a SIZE
2.
Select WATER TEMPERATURES
l
Turn the knob to point at a set-lng that describes the size of load you want to wash Set the knob on or between EX SMALL [a few items] and LARGE [a full load). NOTE: Use the LARGE water level for best permanent press results.
l
9 Match the wash and rinse water temperatures to the type of fabrics and solis being washed l This drawing shows a warm wash (top temperature) and cold rinse [bottom temperature) selection Recommended wash temperatures can be found in your �Laundry Guide�.
LOAD
SIZES
AND
WATER
the freely or too or
LEVELS
CAUTION : DO NOT OVERLOAD WASHER. (17.3 gals./655 (14.7 gals./557 (12.1 gals./45.B EX-SMALL (9.5 galU36.0 L)� L)� L]� L)�
For best cleaning results, load must be able to move in the water. Too big a load little water can cause wear tearing of load items
