|
Who's Online
There currently are 5925 guests online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
Great price, Quick delivery, the document was very usefull A+++++++++++++++
;
Thank´s for your help, I already recived these manual from you
;
Thank you for your manual It has the basic things to and i use the Oszi for Longer Time.
THX
;
Actually, I was looking for this information for 3 years!...now thanks to you, the manual is on my hands and of great help, cause I understand now where I was doing wrong connections and wires...excellent, I'll be back to you if in need, thank you.
;
This manual covers the main equipment features only. While it also includes the procedure for saving and loading from the now long obsolete memory cards it does not mention the how to operate with the optional floppy drive interface so I am still at a loss about how to use this! Note that there is a separate manual covering the MIDI interface and programming via the keyboard, not included in this download. You will also need to get hold of this if you want to use the MIDI interface properly. Basically there is little difference between this manual and the free to download manual for the similar PR60 model.
11. Removethe base grille by grasping at both ends and pulling it straight out. 12. Remove the hinge cover by squeezing both sides together. 13. Use a 5/16" socket and ratchet to remove the two screws from the bottomhinge. Save the spacer. "14. Pull the metal hinge pin from the sideof the lower hingeand place it, includingthe spacer washer, into the top hole. 15. Pry out the two screw hole plug buttonson the bottomleft side of the top door and lower door. Removethe door stops (metal plate) on the bottomof each door and install them on oppositesides. Press in the plug buttons in the holes on the right side of bothdoors. 16. Set the lowerdoor on the bottom hinge,making sure the hinge pin enters the bushing in the door bottom. 17. While holding the door in a closed position,take the center hingepin that was removed in step 3 andinsert it through the left hole of the center hinge andinto the bottom door bushing. Make sure the long pin goes into the bottomdoor and the short pin goes into the top door. 18. Set the upper door on the center hinge, making sure the hinge pin enters the door bushing. When you close the door, the gasket should hold it in place. 19. Makingsure to use the same numberof spacers that were originally used beneaththe upperhinge, install the hinge mounting screws. Beforetightening these screws, make sure the top of the door is level with the cabinet top, and the space between the door is equidistantacrossthe entirefront. Avoidover-tighteningthese screws. Tighten both until they are just snug, then turn them in another one-halfturn. 20. Examinethedoor gasketall around each door, makingsure no gaps are visible between the gasket and cabinet. If a gap shows, try stretching the gasketaway from the door so the magnet will contact the cabinet surface. 21. To replacethe basegrille, line up its springclips with the square openingsin the cabinet and tap each end in until the gnlle locks in place. Replace hinge cover. 22. Replaceall food and return the fresh food control to its usual operating position.
|
|
|
> |
|