WHIRLPOOL JER8750ACW
Owner's Manual

Controls at a Glance
Oven Temperature Adjustment Option
Ifyouthinktheovenshouldbehotterorcooler, youcanadjust it yourself. To decide how much to change the thermostat, set the oven temperature 25°F higher or lower thanthe temperature in your recipe, then bake. The results of the "test" should give you an idea of how much to adjust the thermostat, To adjust the thermostat: 1. Press the Bake pad. 2. Enter 550° by pressing the number pads "5, 5, 0". 3. Press and hold the Bake pad for several seconds until 0° appears in the display. 4. Press any number pad to change the temperature. Each time a pad is pressed, the temperature changes by 5°F. I_ Press repeatedly to reach +35°F. Continue pressing to reduce the temperature up to -35°E 5. When you have made the adjustment, press the Stop/Clear pad and the time of day will reappear in the display. The oven will now bake at the adjusted temperature. It is not necessary to readjust the oven temperature if there is a power interruption. This adjustment will not affect broil or clean temperatures.

Clock Controlled Oven Cooking Beep Options
� Option 1 (default option): Four beeps at the end of cooking, then, one beep every 30 seconds for the next five minutes or until the Stop/Clear pad is pressed.

� Option 2: Four beeps at the end of cooking, then, one beep every minute for the next 12hours or until the Stop/ Clear pad is pressed. � Option 3: Four beeps at the end of cooking, then, no other beeps.

Setting Clock Controlled Oven Cooking Beeps
1. Press Cook Time and Stop/Clear pads at the same time and hold for three seconds. � A single beep will sound. � Display will show the indicator word COOK and the current option. 2. Press the appropriate number pad (1, 2, or 3) to select the option you wish. The current time of day will reappear in the display after four seconds.

Automatic

Oven Turn Off Option

Timer Beep Options
� Optionl: Onelongbeepattheendofthetimeroperation, then, one short beep every 30 seconds for the next five minutes or until the Stop/Clear pad is pressed. � Option 2: One long beep at the end of the timer operation, then, one short beep every minute for the next 12 hours or until the Stop/Clear pad is pressed, � Option 3 (defualt option): One beep at the end of the timer operation, then, no other beeps. Setting the Timer Beeps

The oven will automatically turn off after 12 hours, if you accidentaIIyleave it on. You can deactivate this feature, if desired. To Eliminate 12 Hour Turn Off 1. Press the Clock pad and hold for three seconds or until "12"appearsinthedisplay. TheindicatorwordTIMEwill flash in the display. 2. Press any number pad until 8888 appears in the display. Current time of day will reappear in the display after four seconds. To restore: Press the Clock pad andhold for three seconds oruntil8888appears.Press"l"numberpad. "12" will appeal briefly in the display followed by the current time of day.

1. PresstheTimerandStop/Clearpadsatthesametimeand hold for three seconds, � A single beep will sound. � Display will show the indicator word TIMER and the current option. 2. Press the appropriate number pad (1, 2, or 3) to select the option you wish. The current time of day will reappear in the display after four seconds.