The service manual when downloaded and printed out was clear and easy to read. The manual is complete with the schematic diagram and technical data. I occasionally require a manual and now having registered with this company I shall order from them in the future.
Text excerpt from page 8 (click to view)
REMOVING THE FILTER
Removing The Filter
The filter must be taken out if: � the washing machine does not drain properly, � small items, e. g. buttons and coins rattle in the pump and � 2 to 3 times a year for inspection. You must remove the residual water before taking out the filter. Carry out the steps in the �Draining Residual Water� section, but only up to point 4. Then follow the points given below. 1.Open the filter but do not withdraw it completely. Slowly turn the handle anticlockwise until the water drains out. Make sure that the water has cooled before letting it drain. 2.Wait until all the water has drained out. 3.Now unscrew the filter completely and extract it. 4.Clean the filter and the filter chamber. 5.Insert the filter with the guide pin upwards and screw it in clockwise. 6.Lay the hose in the cover, fold the cover up and close it using the detergent dispenser insert or a coin. The dot points to the closed lock. 7.Pour about 1 l of water into the detergent dispenser to reactivate the Eco System. You must also put the plug back into the socket. 8.You can now load the washing machine and start the desired programme.
