Very clear scan, I recommend it. Definitely a must have for any 3362 owner.
Alpine could have written a slightly more complete manual, though. It's already pretty huge, but the unit has so many functions, I feel some more explanation would have been better.
Yamaha's manual of their comparable YDSP-1 is a little better in my opinion.
Correct manual received and of good quality but the contents of the file for the Service Manual for the same monitor is for a 20" TV not the RGB Monitor.
The owners manual for the Pioneer VSX-D603S was exactly what I needed. I received it in a timely manor and it was priced fairly. I definately will use your servise again. Thank You
Text excerpt from page 45 (click to view)
2. Remove the T-40 Torx head bolt securing the drive shaft bearing to the thrust plate. 3. Remove the four (4) T-40 Torx head bolts securing the thrust plate to the posts on the motor mounting plate. NOTE: The two (2) screws at the top of the bracket have ball ends. (Fig. 3-31) Figure 3-32 shows all the components of the thrust plate assembly.
Bolt with Ball End
Bolt without Ball End
Fig. 3-31
Fig. 3-32
With the thrust plate removed, the drive belt, pulley and brake assembly can be removed.
Removing the Brake Assembly/Nutate Shaft
1. Remove the spin basket. 2. Remove the drive belt from the large pulley. 3. Pull the large pulley from the nutate shaft. 4. Rotate the cam driver counter-clockwise while pulling the brake assembly out. (Fig. 3-33) 5. The brake assembly/spin tube and nutate shaft can now be removed.
Cam Driver
Fig. 3-33 6. Pull the nutate shaft out of the brake assembly/spin tube.