|
|
|
Who's Online
There currently are 5726 guests online. |
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
It is perfect, exactly what we needed. It's like the paper version but less clutter.
 ;
Received my manual within 24 hours. Very clear scan of the manual I needed. Thanks!
;
Very clear scan, I recommend it. Definitely a must have for any 3362 owner.
Alpine could have written a slightly more complete manual, though. It's already pretty huge, but the unit has so many functions, I feel some more explanation would have been better.
Yamaha's manual of their comparable YDSP-1 is a little better in my opinion.
;
Immediate response with excellent service - highly reccommended
;
Correct manual received and of good quality but the contents of the file for the Service Manual for the same monitor is for a 20" TV not the RGB Monitor.
s
Remove the load from the dryer as soon as tumbling stops to reduce wrinkling. This is especially important for permanent press, knits, and synthetic fabrics. Avoid drying heavy work clothes with lighter fabrics. This could cause overdrying of lighter fabrics, leading to increased shrinking or wrinkling. If you dry sheets in a mixed load or large items in the Bulky Items cycle, rearrange the load when the Damp & Dry signal sounds. This will aid in the drying process.
Wet
The Wet light will turn on when a wet item has been detected in the dryer. The Wet light will remain on until:
s s
s
The damp dry point is reached in an Automatic Cycle. The dryer enters the cool down period in a Manual Cycle.
s
Damp
The Damp light indicates that the load has reached the damp dry level. NOTE: The Damp light is not used with manual cycles.
Cycle tips
s s
Dry most loads using the preset cycle settings. Refer to the Automatic or Manual Preset Cycle Settings chart (in the �Cycles� section) for a guide to drying various loads.
s
Cool Down
The Cool Down light glows during the cool down part of the cycle. Laundry is cooling down for ease in handling.
Drying temperature and Dryness Level are preset when you choose an Automatic Cycle. You can choose a different dryness level, depending on your load by pressing the DRYNESS LEVEL button to select MORE or LESS. If you wish to adjust the cycle length of a Manual Cycle, you must press MORE TIME or LESS TIME. Adjust the temperature of a Manual Cycle by pressing TEMPERATURE until the desired temperature is selected.
Cycle Complete
This light glows when a drying cycle is finished. If the WRINKLE SHIELD� feature has been selected, the WRINKLE SHIELD� feature indicator light will also be on. The Cycle Complete light turns off 1 hour after the end of a drying cycle (including the WRINKLE SHIELD� cycle of 2 hours), when Pause/Cancel is pressed, or when the door is opened.
s
NOTE: You cannot choose a Dryness Level with Manual Cycles.
WRINKLE SHIELD� Feature
The WRINKLE SHIELD� feature light glows when this option is selected. This indicator stays on with the Cycle Complete light.
Status Lights
You may follow the progress of your dryer with the drying Status indicator lights.
Control Locked
The Control Locked light glows when this option is enabled.
Indicator lights
Other indicator lights on the control panel show Cycle, Temperature and Signals settings selected. The time display will indicate the estimated or actual time remaining in a cycle.
Sensing
When a cycle is first turned on, the Sensing light glows until a wet item is detected. s In an Automatic Cycle, if a wet item has not been detected within 10 minutes, the Sensing light will turn off and the dryer will shut down.
s
In a Manual Cycle, if a wet item is not detected after 10 minutes the Wet light turns on and the selected cycle continues.
19
|
|
|
> |
|
