|
|
|
Who's Online
There currently are 5946 guests and
1 member online. |
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
It is perfect, exactly what we needed. It's like the paper version but less clutter.
 ;
Received my manual within 24 hours. Very clear scan of the manual I needed. Thanks!
;
Very clear scan, I recommend it. Definitely a must have for any 3362 owner.
Alpine could have written a slightly more complete manual, though. It's already pretty huge, but the unit has so many functions, I feel some more explanation would have been better.
Yamaha's manual of their comparable YDSP-1 is a little better in my opinion.
;
Immediate response with excellent service - highly reccommended
;
Correct manual received and of good quality but the contents of the file for the Service Manual for the same monitor is for a 20" TV not the RGB Monitor.
: Re.rn6~iiig.the�xrispe�rc To remove Pull out lo the slop, llfl the front nd pull again. the crisper%: 1. Slide cnsper strarght out lo the slop, lrfl front. then slrde out the rest of the way. 2. Replace in reverse order.
Remove the glass insert, lift the frame front, then the back.
Removing the crisper cover (Models ETPOGM, ETSOGK and ETZONK) To remove the cover: 1. Push up glass insert from bottom, then slrde out with both hands. 2. Lift lront of cover frame. 3. Lift out cover frame by pullrng up and out. 4. Remove metal cover support. To replace the cover: 1. Replace metal support on wall supports In from sectron of cabinet. 2. Frt back corner into notch supports on walls of refrigerator. then lower into place 3. Slide back of glass insert into place, then lower front.
Remove the glass Inset-& lift the frame front.
Removing the crisper cover (Models ET18GK, ET18HM and ET18HK) To remove crisper cover: 1. Push up glass Insert from the bottom, then slide out with both hands. 2. Lift front of cover frame and remove cover support. 3. Lift out cover frame by pulling up and out. To replace crisper cover: 1. Fit back of cover into notch supports on walls of refrigerator, then lower front into place. 2. Insert cover support (with the long tab toward the front) into the groove on the underside of the crisper cover. NOTE: If support needs adjustment, turn base clockwise to raise, or counter-clockwise to lower. 3. Slide back of glass Insert into place, then lower front.
9
|
|
|
> |
|
