|
|
|
Who's Online
There currently are 5961 guests online. |
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
The Owner's manual was very helpful. The WEGA is about 35 years old and needed repair.
Your Website is pretty good und easily to handle.
Thank You
Carl-W. Lohmann
;
Perfect. Very good service and very good scanning quality. All sheets are very legible. Thank's
;
My first manual from Owner-Manuals.com but not the last! I am very satisfied with the easy ordering and promt delivery of a manual I did not find anywhere else.
 ;
This manual is very helpfull to use the Power Supply. All technical information has been available.
For service use the circuit diagrams are very good.
Thanks .
;
Very comprehensive document which is a must-have for any Satellit 2100 owner whose set up is somewhat intricate. Due to the bad quality of the pictures that are rather dark and a bit blurred I gave 4-star feedback.
Removing
the crispers
and crisper
cover
I//k
Pull out to the stop, lift the front
To remove the crispers: 1. Slide crisper straight out to the stop, lift front, then slide the rest of the way out. 2. Replace in reverse order. To remove the cover: 1. Push up glass insert from bottom, then slide out with both hands. 2. Lift front of cover frame. 3. Lift out cover frame by pulling up and out. 4. Remove metal cover support. To replace the cover: 1. Replace metal cover support on wall supports in front section of cabinet. 2. Fit back of corner into notch supports on walls of refrigerator, then lower into place. 3. Slide back of glass insert into place, then lower front.
Remove the glass insert, lift the frame front,
then the back.
Adjusting the crisper humidity control You can control the amount of humidity in the moisture-sealed crisper. 1. The control can be adjusted to any setting between LOW and HIGH. 2. LOW (open) lets moist air out of crisper for best storage of fruits and vegetables with skins. 3. HIGH (closed) keeps moist air in the crisper for best storage of fresh leafy vegetables.
Moving Pull out to the stop, lift the front and pull again. hl 1. 2. 3. 4.
the meat drawer
and cover
To remove
the meat drawer:
Slide the meat drawer out to the stop. Lift the front. Slide the drawer the rest of the way out. Replace in reverse order.
To remove the cover: 1. Tilt front of cover up, lift at back, and pull straight out. 2. Replace in reverse order.
7
|
|
|
> |
|
