|
|
|
Who's Online
There currently are 6043 guests online. |
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Easy to access. Clear instructions. No problems. Printed fine.
 ;
Great scan but please note that it is entirely in GERMAN.
;
High quality scan of the manual, very quick and easy download and very important, a truly honest price. thanks
;
Minden rendben, de két megjegyzés, az ábrák nehezen kivehetők és a fizetés után 24 órát kell várni a letöltésre.
;
Manual correct, and complete. Downloads cleanly. Format of manual was presumably difficult to PDF to A4, but works reasonably well.
Adjusting
the refrigerator
shelves...
I, Ftrst, remove food from shelf 2 Slide shelf strarght out to stop 3 Lift front 4. Slrde the rest of the way out Replacing Shelf: 1 Frt back of shelf on top of gurdes wrth wire stops on the bottom of gurdes. 2 Lrft front, slide shelf In until rt clears g&e stops The meat pan and cover can be removed for cleanrng and moved to another shelf, If desred Remove the meat pan first
Moving
the meat pan and cover...
Removing: I Slide the pan out to stop. 2. Lift the front of meat pan. 3. Slide pan the rest of the way out 4. Tilt cover up at front. 5. Pull forward and out Replacing: 1 Fit notches underneath cover over rear and center cross bars on shelf 2. Lower cover In place. 3. Replace meat pan rn reverse order
Removing
crispers
and crisper
cover.. .
Lift the Front, Then the Back.
Removing the Crispers: 1 Slide crrsper strargnf out to stop, lift front, then side the rest of the way out 2 Replace rn the reverse order Removing Cover: 1 Loftfront and remove the cover support 2 Loftout cover by pullrng up and out Replacing Cover: 1 Fit bock of cover Into notch supports on walk of refrrgerator, then lower front Into place 2 Replace cover support with the long tab towards the front Note: If support needs adjustment. turn base right to lower, or left to rorse
Pull out to stop. e Front and Pull Again.
Changing
WARNING:
the light bulb...
Before removing the light bulb, either unplug the refrigerator or disconnect the electricity leading to the refrigerator at the main power supply. Shock and injury can occur if electricity remains connected.
1 Reach behInd control console to find bcllb 2 Remove bulb 3 Replace with a 0watt opp:jance bcllb
Removing
and adjusting
the freezer shelf...
To remove shelf: 1 Lift front slrghtly 2. Loftback off supports 3 Replace In reverse order 70 adjust shelf: 1 Remove sheif 2 Remove supports by sltdrng upwards 3 Replace supports on desired level 4 Replace shelf
b
|
|
|
> |
|
