I'm so glad I was able to find a site to download my missing manuals. Very reasonable prices and they kept me informed about the process and I had my manual within less than a day. The only thing I wish was an option is a 100% English version with no spanish or anything. But overall great site.
The manual is complete with excellent quality! One suggestion, show number of pages and weather it is multi-lingual. The AD 600 Manuel is about 76 pages and over half is non English. This results in a larger print job than usually needed. Having this information, one could select the desired pages for printing.
This is an excellent handbook. We had no information on the appliance until we obtained this and are now able to use the appliance to its full potential. Strongly recommended.
Text excerpt from page 12 (click to view)
Adjusting
the crisper
cover
track
Because your crispers are not the same size, your crisper cover has an adjustable center track so you can switch positions of the crispers. You can adjust the center track with the cover in the refrigerator by removing the crispers and the cover insert.
To remove the center track: 1. Push up the cover insert from the bottom,
than slide out with both hands. 2. Gently pull up on front end of track. 3. Pull rear end of track out of opening in cover.
To replace the center track: 1. Insert rear end of track (with hole) into
opening in cover. 2. Lower front end of track into slot. 3. Make sure rear end of track has snapped into place on underside of cover.
Adjusting
the freezer
shelf
Adjust the freezer shelf to match the way you uw your freezer.
To mmovo the shelf: 1. Lii entire shelf slightly.
2. Move shelf all the way to one side. 3. Tilt other side up and out of shetf support 4. Pull shetf up and out.
To replace the sheW: 1. Tilt the shelf ad insert into freezer
compartment. 2. Insert ons end of the shelf all the way into the center of the shelf support cups. 3. Lower other and d shetf and insert into the shelf support cups. 4. Lower shelf into place. NOTE: The shalt should lower slightly and lock into plaoe. If the shelf does not appaar sturdy, make sure both ands of the shelf are inserted into the shelf support cups. 12
