|
|
|
Who's Online
There currently are 6033 guests online. |
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Product was very good. Received quickly and complete
 ;
Although printing quality is not the best, the manual was very helpful in order to reactivate this ancient but still good electronic musical instrument.
;
as a first-time user and buyer from this site, i found the overall service outstanding!! this product is a godsend as, without it, i would never have been able to find my way around and use my machine as intended. i will certainly use this site again as required. many many thanx!!
;
This manual is exactly what I needed. This site always has every manual I need, and it is also much less expensive then most other sites. This is the only manual site I will use.
;
Useful manual, good scan, worth the pay if you find the unit difficult to operate.
Moving the meat drawer and cover...
The meat drawer and cover can be removed for cleaning and moved to another shelf, if desired. Remove the meat drawer first.
remove: 1. Slide meat drawer out to stop. 2. Lift the front of the meat drawer. 3. Slide drawer the rest of the way out. 4. To remove the cover, lift it straight up and out. To replace: 1. Fit notches of cover sides over center shelf support. 2. Lower cover into place. 3. Fit edges of drawer into supports on cover. 4. Slide meat drawer into place. i,:. e _ . A-:.* y,
TO
Changing the light bulb...
1. Reach behind the control console to find bulb. 2. Remove bulb. 3. ReDlaCe with a 40-watt aooliance bulb.
Adjusting the refrigerator shelves...
To remove the shelf: 1. First, remove food from shelf. GUIDE STOP 2. Slide shelf straight out to stop. 3. Lift front, slide shelf the rest of the way out. SHELF STOP To replace the shelf: 1. Fit back of shelf on top of guides with wire stops on the bottom of guides. 2. Lift front, slide shelf in until it clears guide stops.
!w
�
SHELF GUIDE
Removing crispers and crisper cover...
LIFT THE FRONT, THEN THE BACK. \
To remove the crispers: 1. Slide crisper straight out to stop, lift front, then slide the rest of the way out. 2. Replace in the reverse order. To remove the cover: 1. Lift front and remove the cover support. 2. Lift out cover by pulling up and out. To replace the cover: 1. Fit back of cover into notch supports on walls of refrigerator, then lower front into place. 2. Replace cover support with the long tab towards the front. NOTE: If support needs adjustment, turn base right to raise, or left to lower.
PiJU OUT TO STOP. LIFT THE FRONT AND PULL AGAIN.
|
|
|
> |
|
