|
|
|
Who's Online
There currently are 6043 guests online. |
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
The only reason I gave this less than 4 stars, is because it shouldn't take 24 hrs to have the download available. I was surprised to find that I had to wait until the next day to be able to download the manual that I paid for.
The manual itself is the correct manual.
 ;
Excellent replacement for original Owner´s Manual. I am totally satisfied!
;
Great service. Manual is as advertised and delivered when promised.
;
Perfect quality, highly appreciated service !!!
Fast delivery of the download info, no issues at all. Recommended E-manual shop !!!
;
hi owners manual- crew,
i am very satisfied about the trade with you.
if i need some other manuals, i will contact you again.
thanks
frank kappler
Remove and empty the storage bin: l If the ice dispenser has not, or will not be used for a week or more, l If a power failure causes ice in the bin to melt and freeze together; l If the ice dispenser is not used regularly.
1. Pull the coverrng slide it to the rear.
panel
out from the bottom
and
3. Lift the front of the storage bin. Pull it out. 4. Empty the bin. Use hot or warm water to melt the ice if necessary. Never use anyfhlng sharp to break up ice in the bin, This can damage the bin and dispenser mechanism. 5. Wash with mild detergent. Rinse wellDo not use harsh or abrastve cleansers or solvents. 6. When replacing the bin, make sure it is pushed in all the way. Push the signal arm down to the ON position to restart ice production, The night light uses a heavy-duty IO-watt bulb. When it burns out, purchase another from your dealer A swatch underneath the panel turns the light on and
nff I, V!
FV1-1
d L,&$
III
OFF/ON Signal Arm �
Night
light
Switch IU II
I
2. Lift the signal arm so it clicks Into the OFF position, Ice can still be dispensed, but no more will be made.
Changing light bulbs.. .
Before removing a light shield for cleaning or for replacing a bulb, unplug the refrigerator. Use opplionce bulbs only
Pull Out at the Botto
Light bulbs behind refrigerator and freezer control consoles: -Pull bottom of panel straight out. -Lift top of panel off supports. -Replace with a 40.watt appliance bulb. - Replace panel in reverse order.
light bulb behlnd Ice maker: - Remove the ice bin (see ice maker instructlons page 1 01. -Replace with a 40-watt appliance bulb. - Replace ice bin 9 Light bulb above crisper: -Pull top of the light shreld away from the back wall. - Ltft shield off base supports. - Replace with a 40.watt appliance bulb. - Replace shield in reverse order. l Night light in dispenser area: (See above.) - Reach for the bulb through the dispenser area. - Replace with a heavy-duty IO-watt bulb.
l
11
|
|
|
> |
|
Home
