|
Who's Online
There currently are 6043 guests online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
It is perfect, exactly what we needed. It's like the paper version but less clutter.
;
Received my manual within 24 hours. Very clear scan of the manual I needed. Thanks!
;
Very clear scan, I recommend it. Definitely a must have for any 3362 owner.
Alpine could have written a slightly more complete manual, though. It's already pretty huge, but the unit has so many functions, I feel some more explanation would have been better.
Yamaha's manual of their comparable YDSP-1 is a little better in my opinion.
;
Immediate response with excellent service - highly reccommended
;
Correct manual received and of good quality but the contents of the file for the Service Manual for the same monitor is for a 20" TV not the RGB Monitor.
Plan to remove and empty the storage bin:
l
l
l
If the Ice dispenser has not, or will not be used for a week or more, If a power failure causes Ice In the bin to melt and freeze together, If the ice dispenser IS not used regularly.
1. Pull the coverrng slrde it to the rear.
panel
out from the bottom
and
2. Lift the signal arm so it clicks into the OFF position. Ice con still be dispensed, but no more will be made.
Night
Light Switch
3 Lift the front of the storage
brn Pull it out IO-watt bulb. It should last about 10,000 hours. When it burns out, purchase another from your dealer.
4 Empty the bin Use hot or worm water to melt the ice If necessary Never use anythlng sharp to break up Ice in the bin This con damage the bin and dispenser mechanrsm. 5 Wash with mild detergent. Rinse well.Do not use harsh or abrasive cleansers or solvents. 6 When replacing the bin, make sure it is pushed in all the way Push the signal arm down to the ON position to restart ice production
the night light uses a heavy-duty
Removing
the freezer basket.. .
For proper air movement, keep the freezer basket In place when the refrigerator is operating.
To remove the basket:
l l l
Slrde out to the stop. Lrft the front to clear the stop. Slide out the rest of the way.
To replace
l l
the basket:
Jl-
l
Place basket on the slides. Make sure the wire stops clear the front of theslides Slide basket in
8
|
|
|
> |
|