perfect! you just sent to me the copy in Italian witout even my specification!!!! so you are really smart cooperative and efficient. To my opinion the best place all over to get a manual of electronics!!!!
Great manual, would not have been able to operate my machine without it!!
James Dawson August 18, 2012
Text excerpt from page 10 (click to view)
Options:
Temp Boost Sensor: If for any reason the incoming water temperature is below 120°F, press the On button to assure the water is heated to proper temperature for best cleaning and drying results. The main wash will be extended and the Heating Delay light will turn on. Press the Off button to cancel the Temp Boost Sensor. Fan Dry Options: Press the Heat button to turn the heating element on during the fan dry period. This option provides faster drying, Press the Air button to turn the heating element off during the fan dry period. To Start Dishwasher:
Indicator
Light:
The Heating Delay light indicates that the main wash is being extended to heat the water to proper temperature.
Adding a Forgotten
Item:
For best cleaning, the forgotten item should be added early in the cycle. 1. Unlatch the door and wait until the sound of circulating water stops. 2. Open the door and add the item. 3. Pause before latching the door. The cycle will continue at the point it was interrupted.
After loading set the dial to the desired cycle. Press button for desired options. NOTE: Run the water from the hot water tap to clear the line of cold water before starting, Press the door until it latches. The cycle will begin with a drain prior to fill.
