Manual was delivered in a timely manner and was all in English as advertised. The manuals I received when we moved into our flat were in German, Italian, and French. Having never used a steamer before, and not speaking/reading German very well, I needed an English Manual. this was a huge help.
This GRUNDIG UV5A Owner Manual is not only an instruction manual but a total functional circuit description of the Multimeter and includes circuit diagram at the end pages. It is very helpful for repairing and calibrating the instrument. It is written in two languages English and German for international support. It was very easy to repair my unit with this document. Regards, Regis Pauly, Electrical Engineer.
The owner's manual was evetything I thought it would be. I was able to print it out using both sides of the paper in quick order, saving me a search online for a used one.
Хорошее качество сканирования.
Мануал пришел часов эдак через 12. В целом доволен.
Text excerpt from page 8 (click to view)
Option Selector Switch
Before starting
your dishwasher
3. Run hot water at sink nearest dishwasher until it is hot. Turn it off. (See page 10 for connecting instructions.)
1. Spin the Upper Spray Arm to make sure nothing will stop it from turning freely. 2. Close and latch the door.
Starting
your dishwasher
NORMAL HEAVY Cycle...
1. Make sure Cycle Control Knob points to dot marked NORMAL HEAVY. 2. Select option. 3. Without turning it, pull the Cycle Control Knob out to start the Cycle.
NORMAL
LIGHT Cycle...
RINSE & HOLD Cycle...
1. Select
Control Knob until it stops at dot marked NORMAL LIGHT. 2. Select option. 3. Without turning it, pull the Cycle Control Knob out to start the Cycle.
1. Turn Cycle
2. 3. 4. 5.
AIR DRY Option only. Uniatch door and open slightly. Pull Cycle Control Knob out. Turn Control Knob clockwise to dot marked RINSE & HOLD. Close and latch the door to start the cycle.
Control Knob
Changing
a setting
during
2. With the Cycle
pulled
out,
You can change a setting anytime any cycle. 1. Unlatch the door to stop the cycle.
turn clockwise to the cycle you want. 3. Be sure the detergent dispensers are filled properly for the new cycle. 4. Latch the door to start the cycle.