The Owner's manual was very helpful. The WEGA is about 35 years old and needed repair.
Your Website is pretty good und easily to handle.
Thank You
Carl-W. Lohmann
My first manual from Owner-Manuals.com but not the last! I am very satisfied with the easy ordering and promt delivery of a manual I did not find anywhere else.
This manual is very helpfull to use the Power Supply. All technical information has been available.
For service use the circuit diagrams are very good.
Thanks .
Very comprehensive document which is a must-have for any Satellit 2100 owner whose set up is somewhat intricate. Due to the bad quality of the pictures that are rather dark and a bit blurred I gave 4-star feedback.
Text excerpt from page 7 (click to view)
SETTING THE CLOCK AND TIMER
Clock
To set the time-of-day clock: "Set and 1. Press the CLOCK pad once. The words Time" will flash in the display. 2. Set the correct � pads. time of day using the �
Timer
To set the timer: 1. Press the TIMER pad once. The words Timer" will flash in the display. 2. Set the pads. desired time using the � and
� To change the time by one minute, press either pad once. � To change the time in increments of 10 minutes, press and hold either pad. When the power is first supplied to the oven or if there has been a power failure, the display will flash. Follow above instructions to set the clock. The clock time cannot be changed when the oven is set for a cook or timing operation, Cancel the operation to set the clock. Press when the CLOCK pad another function to recall the time of day is displayed.
° Press either pad once to change the time by 1 minute (if the Timer is set :
up to I hour), 5 minutes (ff the Time set for over 1 hour), or 10 minutes (ii the Timer is set for over 2 hours). ° Press and hold either pad to change the time in 5 minute or 10 minute in
crements, depending upon the time _ in the display. The TIMER can be set from 1 minute (0HI up to 9 hours and 50 minutes (9 HR:50). The timing operation will start automatic_ Colons will flash in the display to indicate timing operation. One long continuous be will signal the end of the timing operation "End" will briefly appear in the display. Tt time of day will automatically reappear in display. The TIMER pad does not control oven. To cancel: Press and hold the TIMER pac 3 seconds. The time of day will reappear a a slight delay.