It has all the information you will need to fix it. The main circuit diagram is only A4 but being a PDF, you can print it to any size - I did it on two sheets of A3 and it didnt lose any detail - just made it readable when pinned up above the bench. I've found the fault, just need to buy some obscure bits to get it going again!
I cant fault the process, I paid for the manual in the morning and it was ready to download by lunch time.
I am very grateful for this manual. Without it could not repair my receiver.
Text excerpt from page 20 (click to view)
WHIRLPOOL CONSUMER SERVICES
ADJUSTING DISTRIBUTION NOZZLE
Model AWM5080
Page 20 of 21
1. Select any COTTON wash cycle with the prewash off and wait until water begins to enter machine. 2. Turn the machine off at the power point. 3. Remove the machine lid. 4. Adjust the lever until the red pointer is over the index mark. 5. Replace the machine lid, turn on the power, open the detergent drawer slightly and make sure that water is only entering the main wash (middle) compartment and that no water is entering the fabric softener compartment.