|
|
|
Who's Online
There currently are 6043 guests online. |
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
It is perfect, exactly what we needed. It's like the paper version but less clutter.
 ;
Received my manual within 24 hours. Very clear scan of the manual I needed. Thanks!
;
Very clear scan, I recommend it. Definitely a must have for any 3362 owner.
Alpine could have written a slightly more complete manual, though. It's already pretty huge, but the unit has so many functions, I feel some more explanation would have been better.
Yamaha's manual of their comparable YDSP-1 is a little better in my opinion.
;
Immediate response with excellent service - highly reccommended
;
Correct manual received and of good quality but the contents of the file for the Service Manual for the same monitor is for a 20" TV not the RGB Monitor.
Function indicating the need to replace the antibacterial filter. (Depending on the model)
The replacement of the filter is described on the section �Filter Description� of this Product Sheet. Depending on the model, the antibacteria filter indicator icon can be or reminder.
For models with
reminder:
is displayed.
After connecting the appliance, the three-segment icon The segments will sequentially go off: - after 2 months - after 4 months - after 6 months
After 6 months of operation, the alarm icon and reminder icon will be displayed, indicating that it is necessary to replace the filter. After replacing the filter, keep the �OK� button pressed for about 5 seconds, until both icons alarm icon and reminder icon go off and the three-segment icon reappears.
For models with
reminder:
After 6 months of operation, the alarm icon and reminder icon will be displayed, indicating that it is necessary to replace the filter. After replacing the filter, keep the �OK� button pressed for about 5 seconds, until the alarm icon and he reminder go off.
For both models:
It is possible to switch the reminder icon off until the filter is replaced by pressing the �OK� button. Successive reminders will be displayed approximately every 6 hours until you change the filter and reset the alarm.
Listeria indicator (depending on model) - average temperature of the whole fridge compartment Checking the temperature
After the appliance has been connected to the power supply for at least 24 hours, it is possible to check if the average temperature in the refrigerator compartment is the correct one and, if necessary, adjust the setting as indicated in the user instructions (see �Adjusting the temperature�). When the symbol is switched on, It indicates that the average temperature in the refrigerator compartment is proper. For optimum temperature adjustment, the refrigerator is provided with a temperature indicator allowing you to control the average temperature in the refrigerator compartment. If the symbol is switched OFF, it means that the average temperature inside the refrigerator is too warm; in this case adjust the tempature setting and wait for at least 12 hours before checking again if the tempature is proper. The internal temperature of the refrigerator depends on various factors such as the ambient temperature of the room, the amount of food stored and how often the door is opened. These factors should be taken into account when setting the appliance. IMPORTANT: after opening the door or loading the refrigerator, it is normal if the symbol is switched OFF for some time, especially if room temperature is very warm.
31
|
|
|
> |
|
