|
|
|
Who's Online
There currently are 5845 guests online. |
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Super nice! Good to have a manual in digital format.
;
Great job supplying the manual.
Many of these products weerepretty obscure, so it was great that you had
the manual for it!
;
Great manual, would not have been able to operate my machine without it!!
James Dawson August 18, 2012
;
excellent value & price! Includes everything you need to know about the NN-C777! I would buy this again.
;
Very satisfied! I was searching for several days, but nope; till I discovered your webside and there it was at a very reasonable price. Keep up the good work!
Paul
Flanders
Performing
annual
maintenance
,
Your air conditioner needs annual maintenance to help ensure steady, top performance throughout the year. Call the service company recommended by your dealer to: l Inspect and clean the coils and condensate water passages. l Check fan. The compressor and fan motor are sealed and need no oiling. The expense of an annual inspection is the customer�s responsibility. OR If you are familiar with electrical appliances, you can do the cleaning and maintenance yourself. If you choose to do so, follow these steps: NOTE: Do not lift, push, or pull any white beaded foam (expanded polystyrene) parts. 1. Unplug the power cord. 2. Remove air conditioner from window. 3. Remove the front panel. (See �Cleaning the front panel and air filter� on page 7.)
Electrical Shock Hazard Unplug power cord from outlet before servicing. Be sure no liquid gets into the motor, electrical control box, or compressor terminals. Failure to follow these instructions can result in death, electrical shock, or serious injury.
Excessive Weight Hazard Use 2 or more people to move and install air conditioner. Failure to do so can result in back or other injury.
4. Remove the side curtains. Slide curtains out to their fullest width. From the back side, remove the Phillips-head screws which attach the curtains to the cabinet. (See A in illustration.) 5. Remove the slotted, hex-head screws holding the top channel. (See B in illustration.) 6. Remove slotted, hex-head screws on sides of cabinet. (See C in illustration.)
|
|
|
> |
|
