|
Who's Online
There currently are 5900 guests online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
It was easy to order and received exactly what I needed. Only complaint would be the 24 hours you have to wait.
;
Manual was delivered in a timely manner and was all in English as advertised. The manuals I received when we moved into our flat were in German, Italian, and French. Having never used a steamer before, and not speaking/reading German very well, I needed an English Manual. this was a huge help.
;
Great Manual. This manual is available no where else. It was exactly what I was looking for. Only in German.
;
This GRUNDIG UV5A Owner Manual is not only an instruction manual but a total functional circuit description of the Multimeter and includes circuit diagram at the end pages. It is very helpful for repairing and calibrating the instrument. It is written in two languages English and German for international support. It was very easy to repair my unit with this document. Regards, Regis Pauly, Electrical Engineer.
;
The owner's manual was evetything I thought it would be. I was able to print it out using both sides of the paper in quick order, saving me a search online for a used one.
31055020aGB.fm Page 25 Monday, July 31, 2006 6:41 PM
3. Lift the bottom of the inside sheet of glass and remove it (fig. 6)
6
4. Slip out the second and the third sheet of glass, paying particular attention to the position of the word SAFEGLASS (Fig. 7)
7
5. Refit the sheets of glass in reverse order making sure that: - The word SAFEGLASS on the intermediate sheets is facing upwards so as to be correctly legible (fig. 8); - if one of the intermediate sheets does not have the word SAFEGLASS it must be inserted in the position closest to the internal glass. Put the inside glass into position with the word SAFEGLASS facing the top of the door. (fig. 6) Reposition and screw on the two glass supports A (fig. 4 and fig. 5) Note: a slight play between the inside glass and the door uprights is to be considered normal as it compensates expansion of the glass caused by heat. To remount the door: 6. Insert the hinges into their grooves and lower the door fully (fig. 3) 7. Lower the two catches again (fig. 2) 8. Close the oven door fully.
8
9
25
|
|
|
> |
|