|
|
|
Who's Online
There currently are 6043 guests online. |
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
This is an excellent handbook. We had no information on the appliance until we obtained this and are now able to use the appliance to its full potential. Strongly recommended.
;
Very happy to find this from owners-manual.com and the enclosed spec sheet as well.
Not longer available from Sony.
;
The Owner's manual was very helpful. The WEGA is about 35 years old and needed repair.
Your Website is pretty good und easily to handle.
Thank You
Carl-W. Lohmann
;
Perfect. Very good service and very good scanning quality. All sheets are very legible. Thank's
;
My first manual from Owner-Manuals.com but not the last! I am very satisfied with the easy ordering and promt delivery of a manual I did not find anywhere else.
INSTALLATION
Cooktop
� The cooktop must be set into a worktop between 20 mm and 50 mm thick. There must be nothing between the cooktop and the oven (cross rails, brackets, etc.). If the cooktop is to be installed next to a column unit, leave a distance of at least 100 mm from the edge of the cooktop to the side of the column unit. Cut an opening in the worktop of the dimensions shown in the Product Description Sheet supplied separately. If not already present, fit the supplied seal to the cooktop flange after cleaning the contact area as shown in the top figure. If the worktop is made of wood, fit the supplied clips.
�
�
�
Cooktop with electric hotplates
�
1. Position the 4 spring clips (B) and fit them in their locations on the underside of the cooktop. 2. Fit the cooktop into the worktop. � If the worktop is made of marble, plastic, ceramics, natural stone, etc., the cooktop must be secured with brackets (C) code 4819 310 18528 (to be requested from After-Sales Service). 1. Position the brackets over the holes and secure them with the supplied screws. 2. Fit the cooktop into the worktop.
Glass-ceramic cooktop
N.B.: Remove the protective film before installing the cooktop. � If the worktop is made of wood, use the supplied spring clips and screws. 1. Position the 4 clips (D) as shown and at the specified dimensions. 2. Secure the clips using screws (E). 3. Fit the cooktop into the worktop. � If the worktop is made of marble, plastic, ceramics, natural stone, etc., the cooktop must be secured with brackets (F) code 4819 404 78697 (to be requested from After-Sales Service). 1. Fit the cooktop into the worktop. 2. Position the 4 brackets (F) as shown in the figure, in accordance with the thickness of the worktop. 3. Fix the 4 screws (G) in holes (H).
53
|
|
|
> |
|
