My first manual from Owner-Manuals.com but not the last! I am very satisfied with the easy ordering and promt delivery of a manual I did not find anywhere else.
This manual is very helpfull to use the Power Supply. All technical information has been available.
For service use the circuit diagrams are very good.
Thanks .
Very comprehensive document which is a must-have for any Satellit 2100 owner whose set up is somewhat intricate. Due to the bad quality of the pictures that are rather dark and a bit blurred I gave 4-star feedback.
The manual was missing 2 pages but when I presented the problem to the company they made every attempt to get the 2 pages to me, when they couldn't they refunded my money. A very pleasing and easy transaction. The manual they provided was the original, it was concise and to the point. I plan to do business with this company again when should the need arise.
The owners manual is very good. all my how to questions were answered in detail.
Text excerpt from page 3 (click to view)
HOW TO FILL THE SALT CONTAINER
(Not applicable for Australia). Check the water hardness level in your area. Consult your local Water Board or check your last water bill.
� If the water hardness level exceeds category 1, before using the dishwasher for the first time, fill the salt container and run a wash cycle so that any excess saline solution discharged is immediately removed by the water to prevent corrosion. The pre-rinse cycle is not sufficient for this purpose. Check the salt level regularly. Important: Only use regeneration salts recommended for use in domestic dishwashers. Do not fill the salt container with detergent as this will cause irreparable damage to the water softener system.
� �
To fill the salt container:
1. Remove the lower rack. 2. Unscrew the cap by turning it counter-clockwise. 3. If the dishwasher is new, fill the salt container to the rim with water. 4. Fill the container to the rim with salt (max. 2 kg) and stir with a spoon handle. 5. Screw the cap back on by turning it clockwise.
Salt level indicator
The green float is clearly visible in the cap window when the salt container is full. The green float lowers and is no longer visible when the salt container is empty.
