Very comprehensive document which is a must-have for any Satellit 2100 owner whose set up is somewhat intricate. Due to the bad quality of the pictures that are rather dark and a bit blurred I gave 4-star feedback.
The manual was missing 2 pages but when I presented the problem to the company they made every attempt to get the 2 pages to me, when they couldn't they refunded my money. A very pleasing and easy transaction. The manual they provided was the original, it was concise and to the point. I plan to do business with this company again when should the need arise.
Irrespectively of this manual exist only germany language, it's useful - although i need some additional task to translate: My english is bad, but usable - but i really dont speak germany. :)
Text excerpt from page 9 (click to view)
MAINTENANCE AND CLEANING
Before cleaning or carrying out maintenance, press the ON/OFF button. 1. Clean the appliance exterior with a neutral detergent. Do not use abrasive detergents. 2. Regularly wipe the door seal and inside of the door with a damp cloth to remove any food residues. If the spray nozzles become clogged with food residues, clean the spray arms as follows. Upper spray arm: â¢ Slacken the fixing nut (by turning it counter-clockwise) A and detach the spray arm by pulling it down B. â¢ Rinse the nozzles. â¢ Remount the spray arm by aligning it with the rotary mounting and insert it. â¢ Tighten the fixing nut by turning it clockwise. Make sure the nut is fully tightened (it should click). Make sure the spray arm rotates freely. Lower spray arm: â¢ Press the two levers inwards which fix the spray arm A and detach by pulling it up B. â¢ Rinse the nozzles. â¢ Remount the spray arm by aligning it with the rotor pin and insert it. â¢ Push the spray arm down until it is fixed in place. â¢ Make sure the two levers are correctly inserted (they should click). Make sure the spray arm rotates freely. Cleaning the filters 1. Fully unscrew the wide-mesh central filter by turning it counter-clockwise and extract it A. 2. Fully unscrew the cylindrical filter and extract it from the wide-mesh central filter B (pay due attention to the holes in the bottom of the filter). 3. Remove the fine-mesh filter C. 4. Clean all the components. 5. Reassemble: Insert the cylindrical filter in the wide-mesh central filter. Fit the fine-mesh filter and screw down the filter unit by turning it clockwise. The filter unit must be correctly assembled to ensure good washing results.