|
|
|
Who's Online
There currently are 5948 guests online. |
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
This GRUNDIG UV5A Owner Manual is not only an instruction manual but a total functional circuit description of the Multimeter and includes circuit diagram at the end pages. It is very helpful for repairing and calibrating the instrument. It is written in two languages English and German for international support. It was very easy to repair my unit with this document. Regards, Regis Pauly, Electrical Engineer.
;
The owner's manual was evetything I thought it would be. I was able to print it out using both sides of the paper in quick order, saving me a search online for a used one.
 ;
Хорошее качество сканирования.
Мануал пришел часов эдак через 12. В целом доволен.
;
Fantastic quality and impressive delivery time. Based on this manual, I recommend this service without hesitation! Five Stars for certain.
;
Was happy to find the complete owners manual... It's all in there, just like the original...
To reinstall shelf: 1. Hold shelf at front and back. 2. Tilt front of shelf up to a 45� angle to track. 3. Insert both rear shelf slides into upper channel of track. 4. Lower front of shelf to a level position. Make sure both rear shelf slides are securely in the track before letting go of shelf.
NOTE: Insert rear shelf slides into upper channel of track. /
Removing
the crisper
and crisper
cover
Pull out to the stop, lift the front, and pull again.
To remove the crisper: Slide the crisper straight out to the 1. stop. 2. Lift the front slightly. 3. Slide out the rest of the way. 4. Replace in reverse order.
Style
I
To remove the cover: 1. Hold cover firmly with both hands and lift front of cover off supports. 2. Lift cover out by pulling up and out. To replace the cover: 1. Fit back of cover into notch supports on walls of refrigerator. 2. Lower front into place.
Lift the cover front, then the back.
Style
2
To remove the cover: 1. Push up glass insert from the bottom, then slide out with both hands. 2. Lift front of cover frame. 3. Lift cover frame up and out. To replace the cover: 1. Fit back of cover frame into notch supports on walls of refrigerator, then lower front into place. 2. Slide back of glass insert into place, then lower front into place.
13
|
|
|
> |
|
